LMS700KF23-011
Availability: | |
---|---|
Quantity: | |
Size: Given the naming, it's likely a 7.0-inch panel. This size is common for applications like in-car infotainment systems, industrial control panels, and some portable devices.
Resolution: A common resolution for a 7-inch panel could be 800×480 (WVGA). This resolution provides a decent balance between display clarity and the ability to show relevant information in a compact space. However, it could also potentially be 1024×600 or other resolutions depending on the manufacturer's design.
Display Technology: It's probably a TFT (Thin Film Transistor) LCD panel. TFT technology is widely used for its good color reproduction, relatively fast response times, and wide viewing angles compared to older LCD technologies. It might also be an IPS (In-Plane Switching) type for even better viewing angles and color accuracy, or a VA (Vertical Alignment) panel with high contrast ratios.
Color Depth: A common color depth for such panels could be 18-bit (262,144 colors) or 24-bit (16.7 million colors). A higher color depth means more vivid and accurate color representation, which is important for applications where visual quality matters, like in some graphic-intensive in-car displays.
Brightness: The brightness could be in the range of 250 - 500 nits. For in-car applications, a higher brightness (closer to 500 nits or more) might be needed to combat sunlight and provide clear visibility. For industrial or indoor use, 250 - 350 nits could be sufficient.
Contrast Ratio: A typical contrast ratio for a good-quality panel might be 800:1 to 1500:1. This ratio determines the difference between the darkest blacks and the brightest whites that the panel can display, with higher ratios leading to more defined images.
Thickness: Modern 7-inch LCD panels are usually relatively thin, perhaps in the range of 5 - 15 mm depending on the internal components and design. A thinner panel is more convenient for integration into various devices.
Weight: The weight might be around 100 - 300 grams. Lighter panels are easier to handle and install, especially in applications where space and weight are critical factors.
Interface: Common interfaces for such panels include LVDS (Low-Voltage Differential Signaling), which is suitable for high-speed data transmission over longer distances. It could also have an RGB interface or a serial interface like SPI (Serial Peripheral Interface) or I2C (Inter-Integrated Circuit) depending on the application requirements.
Power Requirements: The power consumption could be in the range of 1 - 5 watts, depending on the panel's size, resolution, and other features. It might operate on a voltage of around 3.3V or 5V, which are common voltages for LCD panels.
Operating Temperature: For industrial and in-car applications, it might be designed to operate in a temperature range of -20°C to 70°C. This ensures reliable operation in various environmental conditions.
Storage Temperature: The storage temperature could be in the range of -30°C to 80°C.
Nee Electron Technology Co.,LTD. is very professional touch panel company. We have Capacitor and resistance touch glass factory can accept OEM .Especial in Automation industrial device. We can do all kind of size which you need exactly.
We can open module in small quantity and fast delievery time and very reasonable price when you can’t find any kind of touch glass.
We export a lot of countries. almost got 100% good feedbacks, Because we have super good team to control our products quality at very strict. Also, we have a professional service team to service you after sold out products.
Just contact us :
Skype: chasesweet2
WeChat: chasesweet
Whatsapp/Mobile: +86 13928128361
Email: chasesweet@163.com
Size: Given the naming, it's likely a 7.0-inch panel. This size is common for applications like in-car infotainment systems, industrial control panels, and some portable devices.
Resolution: A common resolution for a 7-inch panel could be 800×480 (WVGA). This resolution provides a decent balance between display clarity and the ability to show relevant information in a compact space. However, it could also potentially be 1024×600 or other resolutions depending on the manufacturer's design.
Display Technology: It's probably a TFT (Thin Film Transistor) LCD panel. TFT technology is widely used for its good color reproduction, relatively fast response times, and wide viewing angles compared to older LCD technologies. It might also be an IPS (In-Plane Switching) type for even better viewing angles and color accuracy, or a VA (Vertical Alignment) panel with high contrast ratios.
Color Depth: A common color depth for such panels could be 18-bit (262,144 colors) or 24-bit (16.7 million colors). A higher color depth means more vivid and accurate color representation, which is important for applications where visual quality matters, like in some graphic-intensive in-car displays.
Brightness: The brightness could be in the range of 250 - 500 nits. For in-car applications, a higher brightness (closer to 500 nits or more) might be needed to combat sunlight and provide clear visibility. For industrial or indoor use, 250 - 350 nits could be sufficient.
Contrast Ratio: A typical contrast ratio for a good-quality panel might be 800:1 to 1500:1. This ratio determines the difference between the darkest blacks and the brightest whites that the panel can display, with higher ratios leading to more defined images.
Thickness: Modern 7-inch LCD panels are usually relatively thin, perhaps in the range of 5 - 15 mm depending on the internal components and design. A thinner panel is more convenient for integration into various devices.
Weight: The weight might be around 100 - 300 grams. Lighter panels are easier to handle and install, especially in applications where space and weight are critical factors.
Interface: Common interfaces for such panels include LVDS (Low-Voltage Differential Signaling), which is suitable for high-speed data transmission over longer distances. It could also have an RGB interface or a serial interface like SPI (Serial Peripheral Interface) or I2C (Inter-Integrated Circuit) depending on the application requirements.
Power Requirements: The power consumption could be in the range of 1 - 5 watts, depending on the panel's size, resolution, and other features. It might operate on a voltage of around 3.3V or 5V, which are common voltages for LCD panels.
Operating Temperature: For industrial and in-car applications, it might be designed to operate in a temperature range of -20°C to 70°C. This ensures reliable operation in various environmental conditions.
Storage Temperature: The storage temperature could be in the range of -30°C to 80°C.
Nee Electron Technology Co.,LTD. is very professional touch panel company. We have Capacitor and resistance touch glass factory can accept OEM .Especial in Automation industrial device. We can do all kind of size which you need exactly.
We can open module in small quantity and fast delievery time and very reasonable price when you can’t find any kind of touch glass.
We export a lot of countries. almost got 100% good feedbacks, Because we have super good team to control our products quality at very strict. Also, we have a professional service team to service you after sold out products.
Just contact us :
Skype: chasesweet2
WeChat: chasesweet
Whatsapp/Mobile: +86 13928128361
Email: chasesweet@163.com
Home | About Us | Products | News | Contact Us