VLJP2079-02 ( WF4701A-01 ) new and original LCD Panel

1. Resolution: The specific resolution of this panel is unknown. However, common resolutions for LCD panels include 320×240 (QVGA), 800×480 (WVGA), 1024×768 (XGA), 1920×1080 (Full HD), etc. For industrial - control or small - device applications where this panel might be used, lower - resolution options like 320×240 or 800×480 are possible, but it could also have a higher resolution depending on its intended use.

2. Panel Size: Without specific data, it's hard to determine the exact size. It could range from a few inches to over ten inches. Smaller sizes such as 3 - 5 inches are often seen in handheld devices or small industrial displays, while larger sizes might be used in some industrial monitoring or public - display scenarios.

3. Display Technology: It's likely to be a TFT - LCD (Thin - Film Transistor Liquid - Crystal Display) panel, which is widely used for its good color reproduction, fast response times, and wide viewing angles. Alternatively, it could be an IPS (In - Plane Switching) panel, which offers even better viewing angles and color accuracy, or a VA (Vertical Alignment) panel with high contrast ratios.

4. Color Depth: Common color depths for LCD panels are 18 - bit (262,144 colors), 24 - bit (16.7 million colors), or 30 - bit (1.07 billion colors). A higher color depth means more vivid and accurate color representation, which is important for applications that require good visual effects, such as in some graphic - intensive industrial control interfaces or digital signage.

5. Backlight: If it's a transmissive LCD panel, it will need a backlight. The most common backlight types are LED (Light - Emitting Diode) and CCFL (Cold - Cathode Fluorescent Lamp). LED backlights are more energy - efficient, have a longer lifespan, and can provide more uniform illumination, so they are widely used in modern LCD panels.

6. Interface: Common interfaces for LCD panels include parallel interfaces (such as 8 - bit or 16 - bit parallel data buses), serial interfaces like SPI (Serial Peripheral Interface) or I2C (Inter - Integrated Circuit), and LVDS (Low - Voltage Differential Signaling) interfaces. The choice of interface depends on the application and the host device that will drive the panel. For example, LVDS interfaces are often used in applications that require high - speed data transmission and long - distance signal transmission.

Nee Electron Technology Co.,LTD. is very professional touch panel company. We have Capacitor and resistance touch glass factory can accept OEM .Especial in Automation industrial device. We can do all kind of size which you need exactly.

We can open module in small quantity and fast delievery time and very reasonable price when you can’t find any kind of touch glass.

We export a lot of countries. almost got 100% good feedbacks, Because we have super good team to control our products quality at very strict. Also, we have a professional service team to service you after sold out products.

Just contact us :

Skype: chasesweet2

WeChat: chasesweet

Whatsapp/Mobile: +86 13928128361

Email: chasesweet@163.com